• Order one "Trim to Size" for each sheet/roll you are purchasing and would like trimmed to size. For example, to have 3 sheets/rolls trimmed, order 3 "Trim To Size" items.
  
• Limit of 5 Spot sizes on a sheet 24" x 96" or smaller. Limit of 9 Spot sizes per sheet on larger sheets. (It is the number of different size Spots that is limited, you can make more than 1 of any of the size(s).
• Spacing Requirements - For trimming, Spots cannot be closer together than 1/4 inch and there is a "cannot use border" of 1/2 inch on both sides and 1 inch on each end of the length.
• We will 'Right-Size' your product if you order a size larger than needed (details below).
• Please be absolutely sure of your measurements. We will trim the product to your specifications and can not replace your product if your measurements are incorrect.
• Click here for a printable PDF worksheet to write your dimensions on when measuring.
• Trim to Size orders are non-returnable due to incorrect measurements.

We Will “Right-Size” Your Order

Choosing a size that is too small may delay your order, but with "Right-Sizing" you cannot order too big a piece!

If you order a size larger than required, we will use the correct (smallest) sheet size needed to do the job and refund the difference. Avoid order-processing delays by ordering the correct or a larger size. (If you order a size too small to do the job, we will contact you to correct it before the order can be processed.)

Need help choosing size and quantity to purchase?

We currently offer trim-to-size for most doors and windows:

Windows

Single Lite

2 Pane
Over/Under

2 Pane
Side by Side

Multi Pane
(3-36 Panes)

Doors

Single Lite, Sliding Patio Door

Two Lite Storm Door

Multi Lite
(3-36 panes)

Use can use this printable PDF worksheet to write your dimensions on.